重庆雅镂城市公共设施制造有限公司

Case

Purchased stainless steel peel boxes by Xiantao Municipal Environmental Sanitation Management Office, Yubei District, Chongqing

1. Specification: 1050mm×450mm×1035mm(±5mm);
2. The upper cover is made of 304# stainless steel plate with a thickness of 1.5mm, and the reverse side treatment adopts an arc design to avoid residual rainwater from corroding the top cover, and the four co
Details
Xiantao Municipal Environmental Sanitation Management Institute, Yubei District, Chongqing City plans to organize an online inquiry and procurement activity for stainless steel peel boxes, and purchase 150 peel boxes of corresponding specifications, which are produced by Chongqing Yaluo City Public Facilities Manufacturing Co., Ltd.
The products provided by Yaluo are brand new products and fully comply with the following technical standards. details as follows:





1. Specifications: 1050mm×450mm×1035mm(±5mm);
2. The upper cover is made of 304# stainless steel plate with a thickness of 1.5mm, and the reverse side treatment adopts an arc design to avoid residual rainwater from corroding the top cover, and the four corners are rounded to prevent scratches;
3. The barrel body, bottom seat and center column are made of 1.5mm 304# stainless steel plate;
4. The size of the injection port: 420×450×50mm (±2mm) one-time forming process, smooth on all sides, no burr, no scratching;
5. The inner tank is made of SMC (glass fiber reinforced plastic), which is formed at one time by the process of melting and solidifying molding by a hydraulic press, and is processed on the opposite side. It has smooth sides, high temperature resistance, and corrosion resistance. *360*540mm (±5mm), garbage bag hooks are designed along the 4 corners of the inner tank, it is more convenient to set the garbage bag, the four corners of the inner tank are equipped with wear-resistant nails and a handle, which is more beautiful and elegant. Durable, the size of the inner barrel must meet and match the outer barrel to prevent the waste from being thrown out due to the deviation of the inner tank;
6. The bottom of the bucket is equipped with a bottom plate and a limit chute to prevent the inner tank from shifting. There are handles on both sides of the inner tank to facilitate dumping of garbage;
7. The middle column is provided with the ash injection port and the waste battery injection port. The size of the collection box must meet and match the outer box, so as to prevent the cigarette butt and the waste battery from being thrown out due to the offset of the collection box, which is not easy to clean, and the smoke extinguishing place and the waste battery injection port The use of molded decorative protective parts has a generous appearance and prevents scratches;
8. The surface of all stainless steel plate materials adopts the wire drawing process, and all retain the primary color of stainless steel.
9. The fruit leather box opens the door from the front, the door lock and the locks are triangular locks, the locks are equipped with handles, the keys are unified, and have anti-slip function, and each fruit leather box is equipped with 2 iron keys;
10. The bottom of the peel box adopts an integrated design, with 2 fixed beams at the bottom, high-quality stainless steel plates with a thickness of 2mm, 2 bolt holes are reserved for each beam, and 4 built-in fixed expansion bolts;
11. Door hinge: 304# stainless steel integral hinge is adopted, the length of the hinge is the same as the height of the box door, and the inner side of the door is hung with a spring, which can be opened and closed flexibly;
12. The classification logo refers to the "Urban Domestic Waste Classification Logo" (GB/T19095-2019), using outdoor anti-ultraviolet screen printing technology, anti-ultraviolet, wear-resistant, colorful and non-fading;
13. The peel box adopts the argon arc welding process (no welding shall be applied to any connection parts on the surface of the box body), and each joint shall not be larger than 0.2mm; there shall be no wear marks on the surface of the plate; there shall be no cracks, pores, welding fat, and undercutting of the welding wire at the welding place. And spatter and other phenomena, to ensure that there is no de-soldering, virtual welding, welding through and other phenomena. The overall structure and impact resistance meet or exceed national standards.