Categories
Hot Products
Description
Technical specifications and quality requirements of 1.5 cubic garbage collection and transportation box
Dimensions: length≧1950mm wide≧1300mm high≧1050mm.
1.2. Volume≧1.5 cubic meters.
1.3. Thickness of bottom plate≧3mm; thickness of front baffle≧3mm; thickness of rear door plate≧3mm. The thickness of the top plate and side plate is ≧ 2mm.
1.4. The height of the center of the lifting lug and the width of the girder are matched with the existing town and street equipment in our district.
1.5. The overall material is made of galvanized pipe and galvanized sheet.
1.6. Overall design: The box body is an overall arc-shaped frame airtight structure. The box body ensures sufficient strength, and the frame, bottom plate and side plates are formed by integral bending of galvanized sheet, and there must be no reinforcing ribs inside.
1.7. The thickness of the reinforcement plate at the hook of the front stop is ≧ 3mm.
1.8. Injection port: There are 2 feeding ports on both sides; the feeding port is opened by hydraulic struts.
1.9. The injection port and back door of the garbage collection box must be equipped with sealing devices, and the sealing strip of the injection port and the back door must be resistant to oil, corrosion and aging to ensure no sewage leakage; the service life of the sealing strip of the back door of the injection port is ≧ 1 year.
1.10. FRP anti-corrosion layer is laid in the box to ensure the corrosion resistance of the box.
1.11. The overall surface of the dustbin is sprayed with plastic, which is smooth and smooth, and has good anti-corrosion and rust resistance. The overall appearance color is made according to the color specified by the purchaser.
1.12. Box appearance silk screen font.
Dimensions: length≧1950mm wide≧1300mm high≧1050mm.
1.2. Volume≧1.5 cubic meters.
1.3. Thickness of bottom plate≧3mm; thickness of front baffle≧3mm; thickness of rear door plate≧3mm. The thickness of the top plate and side plate is ≧ 2mm.
1.4. The height of the center of the lifting lug and the width of the girder are matched with the existing town and street equipment in our district.
1.5. The overall material is made of galvanized pipe and galvanized sheet.
1.6. Overall design: The box body is an overall arc-shaped frame airtight structure. The box body ensures sufficient strength, and the frame, bottom plate and side plates are formed by integral bending of galvanized sheet, and there must be no reinforcing ribs inside.
1.7. The thickness of the reinforcement plate at the hook of the front stop is ≧ 3mm.
1.8. Injection port: There are 2 feeding ports on both sides; the feeding port is opened by hydraulic struts.
1.9. The injection port and back door of the garbage collection box must be equipped with sealing devices, and the sealing strip of the injection port and the back door must be resistant to oil, corrosion and aging to ensure no sewage leakage; the service life of the sealing strip of the back door of the injection port is ≧ 1 year.
1.10. FRP anti-corrosion layer is laid in the box to ensure the corrosion resistance of the box.
1.11. The overall surface of the dustbin is sprayed with plastic, which is smooth and smooth, and has good anti-corrosion and rust resistance. The overall appearance color is made according to the color specified by the purchaser.
1.12. Box appearance silk screen font.
